C-18 Case Specifications

C-18 PC Case

Model	C-18
Case Type	Round Form Factor (Mid Tower)
Available Stain Colors	Natural, Light Oak, Dark Oak, Candy Apple Red, Golden Yellow, Blue and Purple
Case Dimensions	Exterior: 19.75” (H) x 9.5” (W) x 18.5” (D) Interior: 17.375” (Diameter) x 8.75” (W)
Weight	13 lbs. Shipping/dimensional weight is 28 pounds.
Materials	Maple veneer plywood body, acrylic side panels, aluminum hard drive brackets, acrylic motherboard tray
Motherboard Type* *	ATX (with some restrictions, noted below) and Micro-ATX
Expansion Slots	4-7 (depending on the placement of the motherboard to the side panel)
3.5” Drive Bays	Room for three internal 3.5" hard drives; one additional drive mounts on side panel via optional bracket (drives not included)
5.25” Drive Bays****	0 (none)
Slimline/notebook (12.7mm height) CD/DVD drive bay	1 (drive not included)
Power Supply	Standard/full-size ATX (maximum depth of 160mm; power supply not included)
Cooling Fans	One 140x20mm side blue/white LED fan (intake) - AeroCool Streamliner Two 92x25mm rear fans (exhaust; optional) - ebm-papst #3412L or Nexus DF1209SL-3
Front I/O Panel	USB 2.0 x 4 IEEE 1394 (Firewire) x 1 Headphone x 1 Microphone x 1
Features	• Round Form Factor PC case. • Beautiful maple veneer plywood case with matte finish. • Clear/black/gray .177" thick acrylic removable side panels. • Clear .25" thick acrylic motherboard tray with .5” high standoffs. • Rubber tipped stainless steal legs elevates case 1.5" to improve air flow and decrease dust intake. • Illuminated Bulgin stainless steel power and reset switches. The reset switch LED indicates hard disk activity. • Polished stainless steel fasteners. • Strategically placed rubber grommets and washers absorb vibrations to reduce noise. • Heavy-duty .125" aluminum removable hard drive cage. • Quiet, high-quality AeroCool and ebm-papst or Nexus cooling fans. • Bottom mounted power supply. • Optional side panel hard drive mounting kit perfect for windowed hard drives. • Set of ball-point hex drivers included.

* Long expansion cards installed in the two slots closest to the motherboard I/O panel, might not fit due to contact with the installed slim‑line CD/DVD drive. However, adjusting the mounting of the motherboard tray to the side panel may be a workaround (with a tradeoff being the loss of the use of an expansion slot). See the Owner's Manual for further details.

** When installing a full-size ATX motherboard, the standard PS/2 mouse and keyboard ports are not accessible in this case. Therefore, the use of a USB mouse and keyboard is required (easily plugged into the front USB ports).

*** An ATI CrossFire dongle/cable may not fit in the C-18 case.

**** A slimline/notebook (12.7mm height) CD/DVD must be installed (which requires a slimline CD to IDE adapter).

Hand assembled in the USA